Result with lab location

back to homepage

Approval Status

  • Approval Status: Approved
  • Example Task Force: 10/20/2016

  • SDWG: 12/1/2016

C-CDA 2.1 Example:

  • 2.16.840.1.113883.10.20.22.2.3:2015-08-01

  • 2.16.840.1.113883.10.20.22.2.3.1:2015-08-01

  • 2.16.840.1.113883.10.20.22.4.1:2015-08-01

  • 2.16.840.1.113883.10.20.22.4.2:2015-08-01

Reference to full CDA sample:

  • Results in empty CCD

Validation location

Comments

  • This is an example of a results panel with Laboratory Location details as required by 2015 Certification Sender test 170.315(e1), in compliance with 42 CFR 493.1291(c)(1) through (7).

Custodian

  • George Cole, george.cole@allscripts.com (GitHub: gecole)

Keywords

  • Results, 2015 Certification, Lab Reporting Location

Permalink

Links

 

Example: Result with lab location(C-CDAR2.1).xml download example view on GitHub

<!-- Results with Lab Location this example shows content from the 2015 Certification Sender test file: 170.315_e1_vdt_amb_sample1_v8.pdf
		since the focus of the example is upon the test data statement shown below, multiple actual results values are removed:
		Laboratory Location Details for the above Laboratory Results: The laboratory location details are required to meet the 42 CFR 493.1291(c)(1) through (7) requirements identified in the Regulation
-->
<component>
    <section>
        <!-- ... this component / section is templated as a C-CDA R2.1 Results Section, entries required -->
        <templateId root="2.16.840.1.113883.10.20.22.2.3" extension="2015-08-01"/>
        <templateId root="2.16.840.1.113883.10.20.22.2.3"/>
        <templateId root="2.16.840.1.113883.10.20.22.2.3.1" extension="2015-08-01"/>
        <templateId root="2.16.840.1.113883.10.20.22.2.3.1"/>
        <code code="30954-2" codeSystem="2.16.840.1.113883.6.1"/>
        <title>Results</title>
        <text>
            <table>
                <!-- the results display in 3 columns: 
								col 1: Result Organizer detail, containing the ordered test, date/time
								col 2: the name and result of the items that are resulted
								col 3: additional result details, such as ranges, interpretations, comments
						-->
                <colgroup>
                    <col width="20%"/>
                    <col width="40%"/>
                    <col width="40%"/>
                </colgroup>
                <tbody styleCode="xRowGroup">
                    <tr>
                        <td>
                            <content styleCode="xLabel xContentWrapping" ID="_3ffb46b1-9fe4-45f3-9a0f-e0e492563e7b">Urinanalysis macro (dipstick) panel</content>
                            <br/>
                            <content styleCode="xSecondary xContentWrapping">22-Jun-2015</content>
                        </td>
                        <!-- the CLIA requirement for Lab Location is to show the location in the human readable text -->
                        <td>
                            <content styleCode="xLabel">Laboratory: </content>
                            <content> Value Labs</content>
                            <content> 2474, Rocky place Beaverton OR 97006</content>
                            <content> tel:+1-(555)666-1002</content>
                        </td>
                        <td>
                        </td>
                    </tr>
                    <!-- rows removed just to simplify example -->
                    <tr ID="_13a52df8-79ed-4689-a9da-14c5905de830">
                        <td>
                        </td>
                        <td>
                            <content styleCode="xSecondary" ID="_ea838e08-d5eb-4ed4-a176-e5f9a831a780">Specific gravity of Urine by Test strip</content>
                            <content styleCode="xSecondary"> 1.015</content>
                        </td>
                        <td>
                            <content styleCode="xLabel xSecondary">Range: </content>
                            <!-- SDWG Example agreed to ID reference here since moving to td would mean text 'Range' is in observation -->
                            <content ID="_08b7d0ee-aff1-4144-a3a5-c89d56d855ad">
                                <content styleCode="xSecondary">1.005</content>
                                <content styleCode="xSecondary"> - </content>
                                <content styleCode="xSecondary">1.030</content>
                            </content>
                            <br/>
                        </td>
                    </tr>
                    <!-- rows removed just to simplify example -->
                </tbody>
            </table>
        </text>
        <entry>
            <organizer classCode="BATTERY" moodCode="EVN">
                <templateId root="2.16.840.1.113883.10.20.22.4.1" extension="2015-08-01"/>
                <templateId root="2.16.840.1.113883.10.20.22.4.1"/>
                <id root="1.3.6.1.4.1.22812.20.1.1.4.5" extension="1"/>
                <code code="24357-6" codeSystem="2.16.840.1.113883.6.1">
                    <originalText>
                        <!-- reference the text of the organizer code -->
                        <reference value="#_3ffb46b1-9fe4-45f3-9a0f-e0e492563e7b"/>
                    </originalText>
                </code>
                <statusCode code="completed"/>
                <effectiveTime xsi:type="IVL_TS">
                    <!-- if present, this shall contain the range of times of the resulted components -->
                    <low value="20150622"/>
                    <high value="20150622"/>
                </effectiveTime>
                <!-- The lab reporting location and details are recorded here as the lab was the performed of the battery of tests -->
                <!-- Receiving systems may see the lab reporting location in the author particitipant since the original 2015 ONC certification suggested the author -->
                <!-- Sending systems SHOULD always place the lab reporting location in the performer-->
                <performer typeCode="PRF">
                    <assignedEntity>
                        <id root="2.16.840.1.113883.19.5"/>
                        <representedOrganization>
                            <name>Value Labs</name>
                            <telecom value="tel:+1-(555)666-1002"/>
                            <addr>
                                <streetAddressLine>2474, Rocky place</streetAddressLine>
                                <city>Beaverton</city>
                                <state>OR</state>
                                <postalCode>97006</postalCode>
                            </addr>
                        </representedOrganization>
                    </assignedEntity>
                </performer>
                <!-- components removed to simplify example -->
                <component>
                    <observation classCode="OBS" moodCode="EVN">
                        <templateId root="2.16.840.1.113883.10.20.22.4.2" extension="2015-08-01"/>
                        <templateId root="2.16.840.1.113883.10.20.22.4.2"/>
                        <id root="1.3.6.1.4.1.22812.20.1.1.4.5" extension="13"/>
                        <code code="5811-5" codeSystem="2.16.840.1.113883.6.1">
                            <originalText>
                                <!-- reference the text of the coded component -->
                                <reference value="#_ea838e08-d5eb-4ed4-a176-e5f9a831a780"/>
                            </originalText>
                        </code>
                        <text>
                            <!-- reference the entire text of the component -->
                            <reference value="#_13a52df8-79ed-4689-a9da-14c5905de830"/>
                        </text>
                        <statusCode code="completed"/>
                        <effectiveTime value="20150622"/>
                        <value xsi:type="PQ" value="1.015" unit="1"/>
                        <referenceRange>
                            <observationRange>
                                <text>
                                    <!-- reference the text of the reference range -->
                                    <reference value="#_08b7d0ee-aff1-4144-a3a5-c89d56d855ad"/>
                                </text>
                                <value xsi:type="IVL_PQ">
                                    <low value="1.005" unit="1"/>
                                    <high value="1.030" unit="1"/>
                                </value>
                            </observationRange>
                        </referenceRange>
                    </observation>
                </component>
                <!-- components removed to simplify example -->
            </organizer>
        </entry>
    </section>
</component>

Example: ResultsWithLabLocation.png download example view on GitHub

  1. C-CDA Example Search Help

    C-CDA Example Search Results
    This screen displays the results of executing the example search criteria against the existing examples recorded in the example database.

  2. Search Criteria Panel

    This panel allow you to further refine your queries and narrow the results

  3. Text Search Words

    Use this field to enter words related to your search. These words can appear in the title, the comments or as part of a special list of keywords associated with the example. The search words should be entered with spaces separating the items.

  4. Filter by example status

    By selecting the various statuses, the search results can be limited to only the example that are set to the selected status(es). By removing all status selections, the filtering is removed and examples from all statuses will be returned (based on any other filtering).

  5. Select only ONC Certified examples

    These are samples referenced in a government rule or certification companion guide.

  6. Execute the search based on the criteria entered (or retrieve all examples if no criteria specified).

  7. The number of results that match the query parameters can be found here.

  8. Use this link to jump back to the initial page of the application (that lists the sections).

  9. This columns list the names of the examples that match the criteria (and the comment for each example).

  10. This columns lists the area in the C-CDA specification (the specification is broken into distinct topics for the various exchangeable documents, the common header, and the sections that occur within the exchangeable documents) that the example demonstrates.

  11. This columns lists the state of the example in the example verification and approval process.

  12. You can select to download the examples directly or navigate to page with the full detailed description of the example.

  13. Tour Complete

    Return to the C-CDA Example Search Results page.